Scarifier/Grinder

The DESCO Stand-Up Scarifier and Belt Grinder was ERGONOMICALLY designed to ease the users fatigue by getting them OFF their knees while INCREASING PRODUCTIVITY! This Stand-Up scarifier is the most aggressive, light weight walk behind tool available today. This tool uses either a cutter hub, hammer hub or the NEW INNOVATIVE cushion hub with a 36 grit Desco-XL abrasive belt.

Applications

Cutter Hub/Hammer Hub

 

Cushion Hub

  Non-skid removal

 

  Weld grinding

  Rust/scale removal

 

  Scar removal

  Surface profiling

 

  Mil scale removal

  Traffic line removal

 

 

Configurations

Part

Description

Hub Included

110.224

SUFX, Standard

Cutter hub, welded

110.2243

SUFX, Reloadable

Cutter hub, reloadable

110.2246

SUFX, Roto-hammer

Hammer hub

110.2245

SUFX, Belt grinder

Cushion hub

Specifications

Item

Value

Power

120V, 15A

Speed (no load)

6,000 rpm

Weight (motor, body, no hub)

42 lbs.

Length

30"

Height

39"

Vacuum Hose Req.:

 

            Diameter

1-1/2" ID

            Length:

10′ standard, 25′ max

Interchangable Hubs

Hub Type

Description

Cutters are used to remove heavy coatings including epoxy and elastomeric type coatings, mastic removal, non-skid removal, as well as concrete scarification.  Two types of cutter hubs are available:
1) Welded – when cutters wear out the hub is discarded.
2) Reloadable – when cutters wear out, the hub is reloaded.  A reload kit is available which includes cutters, pins and hardware.

 

Roto-Hammers are very effective in removing fracturable coatings. Due to their design, they are also ideal for removing coatings from irregular surfaces or surfaces with holes or protruding objects such as nuts, bolts, rivets and welds.  Due to the Roto-Hammer design, they perform much like a needlegun in terms of both profile and versatility.  Hammers will step over obstacles like bolt heads and step into depressions, in the same manner as the needles of a needlegun.

Cushion hubs are used for applications requiring coated abrasives. The cushion hub excels at tasks such as post-weld leveling and grinding off scars left by cutting off lifting padeyes. These post-weld tasks are traditionally done with a hand held grinder with the tool operator on his knees. However, the SUFX/Cushion setup provides significant advantages over a hand-held grinder process, including: 1) Productivity – faster results, 2) Esthetics – no swirl marks and, 3) Ergonomics – the worker operates the machine from a standing position. .

Consumables

Part

Description

Interchangable Hubs

110.032

Hub, Cutter, Reloadable, w/cutters

110.022

Hub, Roto-Hammer (eq. to a high speed needlegun)

110.096

Hub, Cushion (for use with abrasive belts)

Consumables

110.033

Reload, cutters

820.54677

Abrasive Belt, 36 grit (other grits available)

Accessories

110.001

Replacement Brush Set for Dust Collector.  Comes with brush, channels and rivets