The Descobrader can be used for removing rust and paint or profiling and grinding. This machine was engineered to incorporate an in-line positive adjustment lever that allows precise adjustment of the head at the working surface. The latest addition to the Descobrader line is the Descobrader Weld Cleaning System which dramatically reduces costs and was designed specifically for industries involved with extensive weld cleaning.

Descobrader Models

Pneumatic Powered
Gas Powered
Electric Powered
Propane Powered

Applications

Metal
Non-skid removal
Coating removal
Rust and scale removal
Mill scale removal
Coal tar removal
SSPC Sp. 11 compliant
Concrete
Floor tile mastic removal
Elastomeric coatings
Epoxy coatings
Traffic line removal
Coating preparation
Profiles for non-slip surfaces
Heavy and light coating removal

Descobrader Systems

System includes Descobrader, two cutter hubs (C58, C983), BPH hub, a Roto Peen hub with flaps, a 25lb. weight, and tool kit.

120.116 Pneumatic-powered air requirement is 125 cfm @ 80-90 psi
120.216 Pneumatic Descobrader includes dust shroud with a 3” outlet.
120.174 Electric powered standard voltage is 440 three phase or 220 three phase. A 220 single phase is also available at a small additional cost.
120.226 Electric Descobrader includes dust shroud with a 3” outlet.

Descobraders

120.113 Pneumatic powered. Air requirement is 125 cfm @ 80-90 psi. Comes with one hub of your choice. Roto Peen hub is an upgrade.
120.213 Pneumatic Descobrader includes dust shroud with a 3” outlet. Comes with one hub of your choice.
120.123 Electric powered. Standard voltage is 440 three phase or 220 three phase. A 220 single phase is also available at a small additional cost. Comes with one hub of your choice.
120.223 Electric Descobrader includes dust shroud with a 3” outlet. Comes with one hub of your choice.
120.133 Gasoline powered. Rated at 5 hp. Comes with one hub of your choice.
120.233 Gasoline Descobrader includes dust cover with a 3” outlet. Comes with one hub of your choice.

Features and Specifications

Dust free capabilities comply with OSHA regulations for hazardous coating removal. One-man operation, easily maneuvered, high production. Multiple abrasive heads. 30-second head change-out.

Coverage: Up to 400 square feet per hour 5.25 inch cleaning swath Cleans to within 1.25 inch of vertical surface.  Removes coatings up to .5 inch thick.
Power Requirements:
- Air
: 4 hp at 125 cfm and at 80-90 psi.
- Electric: 5 hp in 220 single phase, 220 three phase and 440 three phase.  Comes with 25’ of 14 gauge electrical cord.  Amps: 16 amps with 220 three phase, 8 amps with 440 three phase.
Gas: 5 hp.
Positive adjustment lever for exact depth cut control.

Replacement Parts

120.028 - Type C Roto Peen flap reload
120.030 - Hammer hub
120.055 - Heavy duty pin
120.112 - Desco hub
120.111 - Splined shaft
170.023 - Replacement clean/strip wheel
800.058 - Heavy duty cutter
800.095 - Cutter (leaves smooth finish)
800.094 - Hammer replacement
550.402 - Timing belt
800.516 - Medium duty cutter
800.983 - Kung foo cutter